Pressure Control Valve Used for Excavator/ Construction Vehicles

• Temperature: High Temperature
• Certification: ISO9001
• Media: Oil
• Model NO.: Taifeng
• Standard: Standard
• Connection Mode: Internal Thread
• Power: Hydraulic
• Material: Alloy
• Type: Self-Operated
• Customized: Available
• Painting: as Per Request
• OEM: Yes
• Color: as Per Request
• Transport Package: Plywood Pallet
• Specification: as per drawing
• Trademark: Taifeng
• Origin: China
• HS Code: 84819010
• Production Capacity: 8000tons

Product Description

 
 

Valves series	TRM10	TRM15	TRM15S	TRM20	TRM20E	TRM25	THD12	TET16	TLV22
Number of working sections	1-10	1-10	1-10	1-10	1-10	1-6	1-12	1-12	1-6
Spool stroke (mm)	6	7	7	8	8	11	6	8	8
Working section thickness (mm)	32	38	38	50	46	72	31	38	70
Max. inlet flow (L/min)	80	120	120	180	180	420	50	80	550
Max. working flow (L/min)	50	100	100	160	160	400	50	80	330
Max. inlet pressure (bar)	320	320	320	320	320	380	320	320	350
Flow sharing type	•	•	•	•	•	•
Open centre type							•	•
Load sensitive type									•
Hydraulic control	•	•	•	•	•	•	•	•	•
Manual, mechanical control	•	•	•	•	•		•	•
electrohydraulic control	•	•	•	•	•	•			•
Typical application	1.5-3.5t excavator	4-et excavator	4-et excavator	7-1 Ot excavator	7-1 Ot excavator	crane, rotary excavator	1 -2t excavator	5-8t excavator	crane, Rotary excavator

• Sandwich structure, flexible combination on demand.
• Load pressure compensation, load pressure independent flow distribution.
• Hydraulic pilot control, electric proportional (or switch) control.
• Load holding function is available for boom and arm.
• Limit the maximum pressure of the system through the LS relief valve.
• Through the secondary relief valve to limit the execution system from overload and set the secondary pressure.
• Small pressure loss and low energy consumption.
• Precise control, stable proportional control, comfortable maneuverability.
• High repetition accuracy and small hysteresis.

Mounting and usage

1. During handling, mounting and storage, avoid striking or damaging the machined surface.
2. Do not remove the seals at each port before mounting. It is not allowed to disassemble at will in dusty places to prevent dirt from entering inside.
3. Before use, check whether the technical parameters, spool valve function and oil circuit type of sectional valve meet the requirements.
4. The mounting surface should be flat and correctly connected to each port. The tightening torque of mounting screws, joints, etc. shall meet the requirements.

5. Product Description